For years engineers have been trying to incorporate the hook n’ loop means of attachment
to a roller and band assembly. The problem….you can’t slide a piece of hook material
across a looped material….it grabs immediately, preventing the roller from being
inserted into the band. Now finally, the engineers at Propel-Loc Inc. have perfected
this attachment with the introduction of the “Quick Release Surfacing System”.
Abrasive ____________
Looped ________________
Lining
Air Vents _____________________
Air Flow _________________
Polyamide____________
Body
Loc Nodes ________________________
Band Seats __________
1/8"
Shaft __________________
Roller __________________
Rotation
Section of Spiral Band
Roller shown translucent for clarity
This system allows the user to slide the
Propel-Loc™ patented roller into the
Propel-Loc refill bands
are supplied in 50 and 100 pieces per box. A/O, Ceramic and Trizact are availble
in all popular grades.
Propel-Loc™
patented loop lined abrasive band without catching on initial contact. As the roller and band assembly are rotated and put into use, the loc nodes of the roller
bite into the looped fabric, binding the roller and band tightly together.
While in use the band will not move in any direction, it won’t
twist or creep
up or down. The more drag created by sanding, the tighter the lock.
And, when in use, air flows through the rollers air vents keeping the bands cool
and therefore adding life to the abrasive. Replacing the band is easy, just twist
in the drive direction while pulling up and the loc nodes release from the looped
fabric, allowing you to remove the band quickly and easily. Insert another band
and you’re ready to go again.
Hobbyists, Jewelry Makers, Artists, Machinists, Woodworkers, and Model Makers no
longer need to fumble around for change tools ever again just to change out an abrasive
band. Lock the Propel-Loc™ Roller securely into any rotary tool and your ready for
action!