The
Real Reason Service
Tools
Are Required For
That
Old Rubber Abrasive
Roller
Of Yours, Is Simply
This...
You
Bought A Product
With
A Major Problem
They
Couldn't Fix,
And
They Passed
The
Problem On To
YOU!
|
That's exactly what the engineers at Propel-Loc Inc. asked themselves
when looking for an easier, cost effective way to use a rotating abrasive roller.
Anyone who has used a spindle sander, rotary tool, roller loaded drill press or
inflatable tire knows how time consuming and awkward changing a simple sleeve of
abrasive can be. In some applications as many as two separate service tools are
required just to load and unload an otherwise inexpensive disposable abrasive band.
But after all the tool time that’s needed to change out the band, you've spent more
time in labor than the actual abrasive is worth!
Wouldn't it be nice to just remove
the abrasive, discard it and quickly replace it like you would with a flat hook
'n loop sander? Well, now you can with the Propel-Loc™ patented quick release surfacing
system. After many years Propel-Loc Inc. has perfected a system that allows the
user to simply slide the abrasive band onto the roller, no tools, no screws, no
aggravation!
The secret is in the lining located on the inside of every Propel-Loc™
band and the loc nodes built into every roller. When the roller is rotated in the
drive direction, the loc nodes latch onto the looped lining of the band, locking
the abrasive firmly in place. When in use, the band can't drift or slip, axially
or laterally. You’ll never need another service tool again to change out a band.
A simple twist of the wrist in the drive direction is all that’s required to slide
the band easily off the roller, replace a new band with the same effortless motion.
Use it once and you'll agree that it's the easiest, fastest roller you've ever used.
But just because it's easy doesn't mean it isn't tough, Propel-Loc™ products out
perform the competition in spin speed, heat diffusion, abrasive longevity and finish
quality. And every part is made right here in the United States. Propel-Loc™ products
will pay for themselves many times over, giving you years of quality use without
the aggravation!
Check out the Propel-Loc™ Half Roller that has just recently been
released under the New page and get a glimpse of the other
products scheduled for release later this year under the Coming
Soon page.
You'll also get all the test data info under the
Test Data page. And of course please write with all your comments and
suggestions.
Thank-You For Using Propel-Loc™ Products!
Look for Propel-Loc™ Half Roller in a store near you
Why Not A Hook
'N Loop System In A Rotating Abrasive Roller?
|